33
_____________________________________________________________________________________________
5.4 Commands Specific to the 3532-50, 3522-50
_____________________________________________________________________________________________
:AVERaging
Sets the number of measurement times for averaging.
:AVERaging?
Queries the number of times for averaging.
Syntax
:AVERaging
<data>
<data>
OFF (character data) or 2/4/8/16/32/64 (numerical value in NR1 format)
Function
Sets the desired number of times for averaging.
The numerical value can be in NRf format, but any digits after the decimal point
will be rounded.
Example
Transmission
:AVERaging 32
The count for averaging is set to 32.
Error
If <data> is other than character data and numerical value described above, a
command error occurs.
Executing this command while the open or short circuit compensation is
performed generates an execution error.
Syntax
:AVERaging?
Function
Returns the current setting of the number of times for averaging as character data
or numerical value in NR1 format.
OFF, 2, 4, 8 ,16, 32, 64
Examples
Response
If headers are on
:AVERAGING 32
If headers are off
32
Error
If the response message is longer than 300 bytes, a query error is generated.
