62
_____________________________________________________________________________________________
5.4 Commands Specific to the 3532-50, 3522-50
_____________________________________________________________________________________________
:LOAD
Loads the test conditions of the specified panel number.
Syntax
:LOAD
<data>
<data>
Numerical data in NR1 format
1 to 30
Function
Sets the panel number which you wish to load.
The numerical value can be in NRf format, but any digits after the decimal point
will be rounded.
Example
Transmission
:LOAD 2
The test conditions which are saved in panel number 2 is loaded.
Error
If <data> is other than numerical value described above, an execution error
occurs.
If the panel number in which the settings have not been saved is selected, an
execution error occurs.
Executing this command while the open or short circuit compensation is
performed generates an execution error.
