3
_____________________________________________________________________________________________
1.3 Points for Attention During Use
_____________________________________________________________________________________________
1.3 Points for Attention During Use
(1) If you change the communication condition of the 3532-50/3522-50 while
using it, you should immediately turn the power off and on again. If you do
not do so, the communication conditions will not be changed to the new one.
(2) Always be sure to secu
re the RS-232C cable to the 9593-01 unit by tightening up the fixing screws
provided.
(3) Program messages sent just after the power has been turned on are executed
after the self test has terminated.
(4) It is vital that the proper data format is used when inputting commands with
data values to the 3532-50/3522-50 units.
(5) For details of the various functions, refer to the instruction manuals for the
3532-50/3522-50 units.
