69
―――――――――――――――――――――――――――――――――――――――
6.4 Auto-Range Function
―――――――――――――――――――――――――――――――――――
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
APP
IND
NOTE
6.4 Auto-Range Function
・
The time axis range and the voltage axis range for the
input waveform are automatically set and shown on the
screen display.
・
Taking the lowest numbered channel among the channels
for which waveform display is on, 1 to 2.5 cycles are
automatically set to be recorded as 8 DIV.
Method (on the waveform screen)
1. Press the left and right
CURSOR
keys simultaneously
and then press the
START
key.
2. After setting the range, the
LED
above the
START
key will
light up and then the measurement is automatically
started.
・
If there is only a small difference between maximum
value and the minimum value in the range of highest
sensitivity for the channel 1, the setting is made to the
time axis for the channel 2.
・
If the range cannot be determined, for channels 1 and 2 ,
a warning message appears, and measurement is stopped.
If measurement has started using the auto-range function,
only the items on the next page are changed:
Summary of Contents for 8804
