Hioki 8804 Instruction Manual Download

Page: 52 / 238

―――――――――――――――――――――――――――――――――――――――

4.4 Changing the waveform, status, trigger, and system screens

―――――――――――――――――――――――――――――――――――

NOTE

CURSOR keys

Flashing cursor

＋

−

keys

NOTE

4.4 Changing the waveform, status,

trigger, and system screens

4.5 Function Changing

Method

Press the

MENU/WAVE

key, and the screen display changes

as shown in the Screen Configuration in the previous
page.

Press the

START

key, the measurement will start on any

screen except the system screen, and changes to the
waveform screen.

Method

1. Using the

CURSOR

keys, move the flashing cursor to the

function item.

2. Select the function by using the

＋

and

−

keys.

These functions are basic measurement function, and
there are the Memory recorder, Recorder, RMS recorder,
and X-Y CONT recorder functions.

Turn on the power supply with pressing the

SHIFT

key.

The language to be displayed can be changed.
(JAPANESE to ENGLISH)

Summary of Contents for 8804















































































































































































































































Search results

Summary of Contents for 8804

Reviews:

Related manuals for 8804

Brands by name

Popular brands

Hioki 8804, Instruction Manual

Search results

Summary of Contents for 8804

Reviews:

Related manuals for 8804

Brands by name

Popular brands