Hioki 8804, Instruction Manual

Page: 107 / 238

85
―――――――――――――――――――――――――――――――――――――――
7.2 Display Screens
―――――――――――――――――――――――――――――――――――
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
APP
IND
8 Channel
information
SETTING, UP & LOW Display information for
the input setting or
upper and lower limit
value on the waveform
screen.
9
Waveform
display OFF, ON
Select whether display
waveforms or not.
10
Voltage axis
range
20, 50, 100, 200,
500 mV/DIV
1, 2, 5, 10, 20, 50,
100 V/DIV
Set the voltage axis
range for each channel.
11
Input coupling
V (DC), (GND) Select the connection for
the input.
12 Magnification/
compression
along the
voltage axis
× 4, × 2, × 1, × 1/2 Set the magnification/
compression ratio along
the voltage axis for each
channel.
13
Position -0.4 to 6.4 DIV
(magnification ratio:
×
1)
Set the position for each
channel.
14
Filter OFF, 500 Hz, 5 Hz Set the low-pass filters
to restrict the frequency
bands.
15
Zero adjustment 0 adjust Performs the zero
adjustment.
NOTE
If the printing interval is set to less than 80 at the start
of auto-printing (auto print ON), the following warning
message appears and the interval is forcibly set to 80.
"WARNING 23: Can’t set interval to 1-40".