Hioki 8804, Instruction Manual

Page: 189 / 238

167
―――――――――――――――――――――――――――――――――――――――
12.4 Settings on the System Screen (Page 2)
―――――――――――――――――――――――――――――――――――
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
APP
IND
1
2
3
12.4 Settings on the System Screen
(Page 2)
12.4.1 Scaling Function
The settings on page 2 of the system screen include
scaling function, saving, reading, and deleting the setting
condition, and a self check function.
Scaling Function (Refer to 12.4.1.)
Saving, Reading, and Deleting the
Setting Condition (Refer to
12.4.2.)
Self Check (Refer to 12.4.3.)
・ By setting an external physical amount to correspond to a
one volt input signal (eu/v), the offset, and the name of
the units used (eu), a measurement value which has been
obtained as a voltage value can be converted into a value
in the external units.
・ The scaled values appear on the gauge scales, as range
values (the upper and lower limit values along the
vertical axis), and as the value of V obtained using the A
and B cursors.
・ For the numerical calculation, scaling will be performed
after calculation terminated.
・ Scaling can be performed for each channel independently.