Hioki 8804, Instruction Manual, Page: 120 / 238

98
―――――――――――――――――――――――――――――――――――――――
8.2 Display Screens
―――――――――――――――――――――――――――――――――――
8 Auto print
OFF, ON Printouts
simultaneously with the
waveform display.
9
Channel
information SETTING, UP & LOW
Display information of
the input setting or
upper and lower limit
value on the waveform
screen.
10
Waveform
display OFF, ON Select whether display
waveforms or not.
11
Voltage axis
range 20, 50, 100, 200,
500 mV/DIV
1, 2, 5, 10, 20, 50 V/DIV
Set the voltage axis
range for each channel.
12 Input coupling
V(DC), (GND) Select the connection for
the input.
13
Magnification/
compression
ratio along the
voltage axis × 4, × 2, × 1, × 1/2 Set the magnification/
compression ratio along
the voltage axis for each
channel.
14
Position -0.4 to 6.4 DIV
(magnification ratio;
× 1)
Set the position for each
channel.
15
Filter OFF, 500 Hz, 5 Hz Set the low-pass filters
to restrict the frequency
bands.
16
Zero adjustment 0 adjust Perform the zero
adjustment.
NOTE
If the printing interval is set to less than 80 at the start
of auto-printing (auto print ON), the following warning
message appears and the interval is forcibly set to 80.
"WARNING 23: Can’t set interval to 1-40."