20
―――――――――――――――――――――――――――――――――――――――
3.1 Setup
―――――――――――――――――――――――――――――――――――
NOTE
Effective Battery-Powered Operating Time
(typical value at normal temperature)
Operating condition
Alkaline battery
9420 BATTERY
PACK
Printer not operating
(waiting for trigger, etc.)
Approx. 160 min
Approx. 90 min
Printer operating
recorder function
2 s/DIV 1 Hz sinewave
Approx. 90 min
Approx. 50 min
NOTE
・
If not recharge, the 9420 can not be used.
・
If the battery voltage drops while the unit is running off
of battery power, the 8804 will automatically switch off
the power supply. If the unit is left in this state for an
extended period of time, the battery pack may be
discharged too much. Be sure to turn OFF the power
switch on the unit.
・
When the battery capacity is reduced, the power is
automatically turned off. Before turning on the power
again with AC adapter or new batteries, turn the power
off and leave for about 30 seconds.
・
When not in use for a long time, to prevent possible
corrosion caused by battery leakage, remove the batteries
before storage.
・
For the details on changing and charging batteries, refer
to Section 14.1, "Changing the Battery" and Section 14.3,
"Recharging the Battery."
Actual performance will change from values indicated in
this table according to the types of batteries, temperature,
and printing rate.
Summary of Contents for 8804
