Short Operating Instruction for EDIC-mini 3D-recorder
Purpose:
EDIC-mini
3D-recorder
is a professional stationary stereo recorder. The Recorder features three microphones and two
memory card slots. The use of digital microphones with a built-in 24-bit audio codec ensures maximum recording quality
in the most difficult conditions, as well as high acoustic sensitivity (up to 18 m) and a wide dynamic range (24-bit). The
presence of markers allows it to confirm the authenticity of the record in court. Recording is carried out onto a microSD
card up to 256GB, which provides up to 1 year of continuous recording.
Main Technical Characteristics of the recorders:
*The parameter of autonomy is specified for Record Mode 8KHz/8 bit, in case of higher sampling rate or bitrate,
autonomy value is lower. Autonomy value considerably depends on the model of microSD in use and can vary to be
higher or lower.
Average current
consumption: in record mode (8kHz / 8bit) 5mA (depending on the card), in standby mode 2.5μA
without a card installed.
Operating and storage temperature range ............... 0- + 50C
Operating lifetime ………………………………… .3 years
Functions:
1. Stereo recording, 3 microphones
2. 3D record mode. The track of the 3rd microphone is mixed into the first two
3. Voice Activation System (VAS)
4. Timers to start recording at the preset time (4 pcs) (once and daily);
5. Linear and circular recording
6. Digital markers to check record authenticity and prevent unauthorized modification of files; Calendar, time and date
attachment
7. Encryption of the records made
8. Control and indication: buttons and LED;
9. Playing back the recordings using headphones
10. Full functionality while charging
11. 2 slots for memory cards, SD format
Operating the Recorder
1. Battery Charging
Before starting make sure the rechargeable battery is charged. Charge the battery if necessary.
Connect the supplied cable to the microUSB port of the Recorder, then connect it to the USB port of the PC, or to any
other USB charger with an output voltage of 5V and a current of at least 500 mA. During charging, the blue LED will be on
(VD4), upon completion the green LED is on (VD2). Full charging takes 3-4 hours. The Recorder can also be used during
charging.
Model Power Supply Size (mm)
Weoght
(g)
Autonomy
(h)
Signal-to-
noise (dB)
Sensitivity
(dB)
Sampling rates
(kHz)
Frequency
band (kHz)
Charging
interval
3D
Rechargeable
battery
20х98х98
66
150
65
-80
8;16;32
0,6-15
once a year
PLAY
REC
Card
1
Card
2
VD2 VD3 VD4 VD1
mic 1
mic 3
mic 2
