6) “The key is provided automatically” check box: If the “access point”
does not provide a key for users automatically, uncheck this check
box by pressing “Space.” The default is that the check box is
checked.
7) “Network key” computer edit box: This is a computer edit box to
type the network key if the key is not provided automatically.
8) “Key index” edit box: This is an edit box to type the key number of
the wireless access point that matches the network key input.
9) “Confirm” button: Pressing this button applies the changes.
10) “Cancel” button: You can press this button to cancel the setup.
Note:
1) If “Data encryption” has been set as “disabled,” press “Tab
(Space-4-5)” and it will directly move to the “Confirm” button.
2) “Network key” and “Key index” will be displayed only if you
uncheck the “The key is provided automatically.”
4. “Remove” button: If you want to delete a profile item in the profile list,
select the profile item you wish to delete, and then press “r (dots 1-2-
3-5)” or go to the “Remove” button by pressing “tab (“Space-4-5”)”,
and then press “Enter” on “Remove” button.
5. “Properties” common dialog button: If you want to get information
about a selected profile item in the profile list, press “Enter” on the
“Properties” common dialog button after focusing on a profile item by
using “tab (“Space-4-5”)”. You can reconfirm the added information in
each item. You can modify an item here directly.
In order to exit from “Advance” dialog box, you can press “Space-e(dots
1-5)” or “Space-z(dots 1-3-5-6)”.
17.10.3 Modem & Bluetooth DUN setup
