17.2 Display Compass Heading
You can display compass in Braille Sense OnHand. You can execute
this function regardless of location.
In order to display compass, follow these steps:
(1) Press “Enter-5-6”, regardless of location.
(2) It will show current status of compass.
Also you can execute this function in the “Utilities” program.
(1) Press “Enter” on the “Utilities” program or simply press “b (dots 1-
2)” from the main menu.
(2) Move to “Display Compass Heading” by pressing “Space-4”.
(3) Press “Enter” on the “Display Compass Heading” or simply press
“h (dots 1-2-5)”.
If you want to check current compass, press “Space”. You will hear
current compass.
To exit this function, press “Space-e (dots 1-5)” or Space-z (dots 1-3-5-
6).
Note: It will take about 15 minutes to initialize the unit as following cases:
(1) Far away from the original location with the unit being discharged.
(2) Leave the unit being discharged for more than a month
17.2.1 Options of gyrocompass
There are 2 options in gyrocompass.
1) Refreshing time
2) Compass display type
- Refreshing time
