not work. “Find again” is used to find the text that you have previously
found in the current document.
5.3.3 Replace
To execute this command, press “Space-m (dots 1-3-4)” or “F2,” and
move to “Go To” by pressing “Space-4.” Then, press “Enter” on “Go To.”
Move to “Replace” by pressing “Space-4” to move to “Replace (r),” and
press “Enter,” or press “r (dots 1-2-3-5)” in the “Go To” menu (which is
the short cut). While editing a document, pressing “Enter-r (dots 1-2-3-
5)” will activate this function.
“Replace” also has a dialog box that consists of the following fields:
“Text to find,” “Replace with,” “Search direction,” “Match case,”
“Replace,” “Confirm” and “Cancel.” You can move between the fields by
pressing “tab (“Space-4-5”)” or “shift-tab (“Space-1-2”)”.
The following is a description of each function.
1. Text to find
You can type in the text that you want to be replaced in this field.
2. Replace with
You can type in new text that will replace the text that is found. After
you type in “Text to find” and “Replace with,” the Braille Sense U2 will
find the text and replace it in the direction that you have specified. If
you want to change the direction, press “tab (“Space-4-5”)” to move to
the next field.
3. Search direction
The “Search direction” has the same function as the “Search
direction” explained in section 5.3.1. After you set the searching
direction, press “Enter” to start the replacement of text, or press “tab
(“Space-4-5”)” to set the “Match case” or “Replace.”
4. Match case
This field display only when you execute the “Replace” command in
text file. This field does not display in Braille file. The default value is
