17.8 Stopwatch
When you press “Enter” on the “Stopwatch,” you will show “00:00:00.” If
you press “Enter,” the stopwatch will start. If you press “Enter” again, it
will pause, and the Braille Sense U2 will say the elapsed time, and
display it in Braille. Pressing “Enter” again will restart the stopwatch from
where it paused.
If you press “Backspace” on “work” or “pause,” it will let you know the
elapsed time and will clear into “00:00:00.” While the stopwatch is
working, pressing “Space” will make the Braille Sense U2 say the
elapsed time at the moment. In this case, the Braille display is still just
displaying the clock.
While the stopwatch is running, pressing “Space-F2” will stop displaying
the time while the stopwatch is still running. If you press “Space-F2,” the
time will be displayed again.
If you press “tab (“Space-4-5”)” or “shift-tab (“Space-1-2”)” before the
start of the stopwatch or while it is running, you can switch to the
“Countdown timer.” If you activate the “Countdown timer,” you will be
asked to put in hours, minutes, and seconds. When typing in the hours,
minutes, and seconds, you should type in a two-digit number for the
hour, minute and the second, regardless of whether you are using
computer Braille or regular grade 1 Braille without using a number sign.
Also you can setup the time with the following keys.
1) Movement key
Move to the previous one hour: Space-1
Move to the next one hour: Space-4
Move to the previous 10 minutes: Space-2
Move to the next 10 minutes: Space-5
Move to the previous one minute: Space-3
Move to the next one minute: Space-6
Move to the previous one second: Space-2-3
Move to the next one second: Space-5-6
