Device Connections and Switches
156/299
PC Cards cifX Compact PCI, Mini PCI, Mini PCIe, PCI-104 | Installation, Operation and Hardware Description
DOC120205UM53EN | Revision 53 | English | 2019-03 | Released | Public
© Hilscher, 2008-2019
9.6 Mini-B USB Connector (5 Pin)
The Mini-B USB connector is provided for the following PC cards cifX:
CIFX 80-RE, CIFX 80-DP, CIFX 80-CO, CIFX 80-DN,
CIFX 104C-RE, CIFX 104C-DP, CIFX 104C-CO, CIFX 104C-DN,
CIFX 104C-RE-R, CIFX 104C-DP-R, CIFX 104C-CO-R, CIFX 104C-DN-R
In addition a Mini-B USB connector will be available for the following PC
cards cifX if the AIFX-DIAG is connected to the PC card cifX: CIFX 104C-
RE\F* (or CIFX 104C-RE\F\M12), CIFX 104C-DP\F, CIFX 104C-CO\F,
CIFX 104C-DN\F, CIFX 104C-CC\F, CIFX 104C-RE-R\F*(or CIFX 104C-
RE-R\F\M12), CIFX 104C-DP-R\F, CIFX 104C-CO-R\F, CIFX 104C-DN-
R\F
Note!
*From the hardware revision 5 of the PC cards CIFX 104C-RE\F (or
CIFX 104C-RE\F\M12) and CIFX 104C-RE-R\F (or CIFX 104C-RE-
R\F\M12),if the diagnostic
AIFX-DIAG
detached network interface is
connected, the
Mini-B USB
connector on the AIFX-DIAG can be used.
Figure 67: Mini-B USB Connector (5 Pin)
Pin Name
Description
1
USB_EXT
USB Bus Power (+5 V dc, supplied externally)
2 D-
Data
-
3 D+
Data
+
4 ID
Not
connected
5 GND
Ground
Table 114: Pin Assignment Mini-B USB Connector
9.7 Rotary Switch for PCI-104 Slot Number
Only for CIFX 104C cards.
The
Rotary Switch for PCI-104 Slot Number
is used for setting the
physical PCI-104 Slot Number. At maximum four CIFX 104C cards can be
plugged as modules one upon the other and each switch position must be
used only once. The module plugged next to the host controller gets the
CLK number 0, the following modules respectively get the next higher CLK
number.
Switch
Position
Module No.
PCI-104 Slot
CLK No.
(Clock)
ID-Select
INT
0, 4, 8
1
CLK 0
IDSEL 0
INTA
1, 5, 9
2
CLK 1
IDSEL 1
INTB
2, 6
3
CLK 2
IDSEL 2
INTC
3, 7
4
CLK 3
IDSEL 3
INTD
Table 115: Rotary Switch for PCI-104 Slot Number, S1
