Getting Started
68/299
PC Cards cifX Compact PCI, Mini PCI, Mini PCIe, PCI-104 | Installation, Operation and Hardware Description
DOC120205UM53EN | Revision 53 | English | 2019-03 | Released | Public
© Hilscher, 2008-2019
Obey to the following
property damage
messages, when installing,
uninstalling or replacing the PC card cifX.
Exceeding permissible Supply Voltage
Operating the PC card cifX with a supply voltage above of the specified
range leads to device damage.
¾
Use only the permissible supply voltage to operate the PC card cifX.
Exceeding permissible Signaling Voltage!
All I/O signal pins at the PC card cifX tolerate only the specified signaling
voltage! Operating the PC card cifX with a signaling voltage other than the
specified signaling voltage may lead to severe damage to the PC card cifX!
¾
For the operation of the PC card cifX use only the specified signaling
voltage.
For further information on the permissible supply and signaling voltage refer
to section
Power Supply and Host Interface
Electrostatically sensitive Devices
¾
Adhere to the necessary safety precautions for components that are
vulnerable with electrostatic discharge.
¾
To prevent damage to the PC and the PC card cifX, make sure, that the
PC card cifX is grounded via the endplate and the PC and make sure,
that you are discharged when you install/uninstall the PC card cifX.
Power Disconnect while dowloading Firmware or Configuration
If the power supply to the PC or device is interrupted while the firmware or
configuration is being downloaded, the download will be aborted, the
firmware may be corrupted, the device parameters may be lost, and the
device may be damaged.
¾
During firmware or configuration download process do not interrupt the
power supply to the PC, or to the device and do not perform a reset to
the device!
Invalid Firmware
Loading invalid firmware files could render your device unusable.
¾
Only proceed with a firmware version valid for your device.
