hilscher CIFX Series, User Manual

Page: 200 / 299

Technical Data 200/299
PC Cards cifX Compact PCI, Mini PCI, Mini PCIe, PCI-104 | Installation, Operation and Hardware Description
DOC120205UM53EN | Revision 53 | English | 2019-03 | Released | Public
© Hilscher, 2008-2019
CIFX 90E-2DP\CO\ET\F,
CIFX 90E-2DP\CO\MR\ET\F Parameter Value
Function Communication Interface with Mini PCI Express,
1 x PROFIBUS interface and 1x CANopen interface
Communication
Controller Type netX 100 processor
RAM 8 MB SDRAM
FLASH 4 MB serial Flash EPROM
Size of the Dual-Port Memory 64 KByte
Integrated Memory
MRAM (only CIFX 90E-
2DP\CO\MR\ET\F) 128Kbyte (= 64K Words);
Note: Using the cifX Device Driver (from Version 1.1.1.0)
access to this memory is possible and it can be used as a
remanent memory.
Bus Type Mini PCI Express One Lane Port, according to [bus
spec 2] and [bus spec 6], refer to section
Overview , page
165 and Pin Assignment for Mini PCI Express Bus / SYNC
Connector (Bootstart), X1/X2 , page 168.
Transmission Rate 33 MHz
Data Access DPM or DMA (Direct Memory Access)
System Interface
Width for the data access to the
Dual-Port Memory (DPM) 32-Bit
PROFIBUS
Communication Supported communication
standard/ protocol (determined by
the loaded firmware) PROFIBUS DP Master,
PROFIBUS DP Slave
Transmission Rate 9,6 kBit/s, 19,2 kBit/s, 31,25 kBit/s, 45,45 kBit/s,
93,75 kBit/s, 187,5 kBit/s, 500 kBit/s, 1,5 MBit/s,
3 MBit/s, 6 MBit/s, 12 MBit/s
Interface Type RS 485, refer to section PROFIBUS Interface page 154.
PROFIBUS Assembly Interface AIFX-DP, refer to section AIFX-DP page 229.
Important! Operating the PC card CIFX 90E-2DP\CO\ET\FF or
CIFX 90E-2DP\CO\MR\ET\F requires proper connection of the
PROFIBUS assembly interface (AIFX-DP) and of the CANopen
assembly interface (AIFX-CO) to the basic card!
PROFIBUS interface
Connector AIFX-DP Cable Connector Fieldbus X3
(JST 10FMN-BMT-A-TF(LF)(SN), Pitch 1,0 mm)
CANopen
Communication Supported communication
standard/ protocol (determined by
the loaded firmware) CANopen Master,
CANopen Slave
Transmission rate 10 kBit/s, 20 kBit/s, 50 kBit/s, 100 kBit/s, 125 kBit/s,
250 kBit/s, 500 kBit/s, 800 kBit/s, 1 MBit/s
Interface Type ISO-11898, refer to section CANopen Interface , page 154.
CANopen Assembly Interface AIFX-CO, refer to section AIFX-CO , page 230.
Important! Operating the PC card CIFX 90E-2DP\CO\ET\FF or
CIFX 90E-2DP\CO\MR\ET\F requires proper connection of the
PROFIBUS assembly interface (AIFX-DP) and of the CANopen
assembly interface (AIFX-CO) to the basic card!
CANopen Interface
Connector AIFX-CO Connector Fieldbus X4
(JST 10FMN-SMT-A-TF(LF)(SN), Pitch 1,0 mm)
SYS System Status LED Display LED Display
For the LEDs at AIFX-DP at channel X1, refer to section
AIFX-DP page 229.
For the LEDs at AIFX-CO at channel X2, refer to section
AIFX-CO , page 230.
Supply Voltage
+3.3 V dc ±5 %, refer to section Power Supply and Host
Interface , page 61.
Important! For all PC cards cifX Mini PCI Express, the increase of
the supply voltage from 0V to 3.3V must last longer than 180 μ s.
Power supply
Current consumption at 3.3 V 800 mA (maximum)