hilscher CIFX Series, User Manual

Page: 85 / 299

Device Drawings 85/299
PC Cards cifX Compact PCI, Mini PCI, Mini PCIe, PCI-104 | Installation, Operation and Hardware Description
DOC120205UM53EN | Revision 53 | English | 2019-03 | Released | Public
© Hilscher, 2008-2019
5.3 PC Cards cifX PCI-104
5.3.1 CIFX 104C-RE, CIFX 104C-RE-R
Kanal 1 /
Channel 1 (CH 1)
Kanal 0 /
Channel 0 (CH 0)
PCI-104 Bus (X1, 120-polig / 120 pin )
System LED (gelb/grün) / (yellow/green)
Kommunikationsstatus-LED 0 und 1 (rot/grün) /
Communication Status LED 0 and 1 (red/green)
Ethernet RJ45-Buchse / RJ45 Socket (X306)
Mini-B-USB-Buchse / Mini B USB Plug
(X305, 5-polig / 5 pin)
Drehschalter Geräteadresse /
Rotary Switch Device Address
(ohne Funktion / without function )
Pi
n 1:
T
X
+
Pi
n 2:
T
X
-
Pi
n 3: R
X
+
Pi
n 4: T
e
rm
1
Pi
n 5: T
e
rm
1
Pi
n 6: RX-
Pi
n
7: T
e
rm
2
Pi
n 8
: T
e
rm
2
LED
grün / green
LED
gelb / yellow
SYNC-Anschluss / SYNC Connector
(X51, 3-polig / 3 pin )
Drehschalter PCI-104-Steckplatznummer /
Rotary Switch PCI-104 Slot Number
SY
S
CO
M
0
CO
M
1
(x1)
(x16)
Figure 21: CIFX 104C-RE*
Kanal 0 /
Channel 0 (CH 0)
Kanal 1 /
Channel 1 (CH 1)
Pi
n 1:
TX
+
Pi
n 2
:
TX
-
Pi
n 3
: RX
+
Pi
n 4:
Te
rm
1
P
in 5:
Te
rm
1
Pi
n 6:
RX
-
Pi
n 7
:
Te
rm
2
Pi
n 8:
Te
rm
2
LED
grün / green
LED
gelb / yellow
PCI-104 Bus (X1, 120-polig / 120 pin )
Ethernet RJ45-Buchse / RJ45 Socket
(X6)
Mini-B-USB-Buchse / Mini B USB Plug
(X5, 5-polig / 5 pin )
Drehschalter Geräteadresse /
Rotary Switch Device Address
(ohne Funktion / without function )
System LED (gelb/grün) / (yellow/green)
Kommunikationsstatus-LED 0 und 1 (rot/grün) /
SYNC-Anschluss / SYNC Connector
(X51, 3-polig / 3 pin )
CO
M
1
CO
M
0
SY
S
Drehschalter
PCI-104-Steckplatznummer /
Rotary Switch
PCI-104 Slot Number
(x1)
(x16)
Figure 22: CIFX 104C-RE-R*
Note: *Device supports Auto Crossover Function. Note also: With loaded EtherCAT
Master firmware only the RJ45 channel 0 can be used, channel 1 is deactivated.
Beginning with the EtherCAT Master firmware version 3 channel 1 can be reactivated if
redundancy is activated. For Open Modbus/TCP with V2.3.4.0 and higher both RJ45
channels can be used.
The meaning of the LEDs depends from the loaded firmware. See chapter LED
Descriptions beginning from page 115.
For the pin assignment of the SYNC Connector refer to section Pin Assignment SYNC
Connector, X51 on page 164. For further information on the Mini-B USB Connector refer
to section Mini-B USB Connector (5 Pin) on page 156.