Hardware Installation and Uninstalling
111/299
PC Cards cifX Compact PCI, Mini PCI, Mini PCIe, PCI-104 | Installation, Operation and Hardware Description
DOC120205UM53EN | Revision 53 | English | 2019-03 | Released | Public
© Hilscher, 2008-2019
Example basic card
CIFX 104C-CO-R\F
,
Cable Connector Fieldbus X4
AIFX-CO
with
Cable
Connector Fieldbus X1
Î
Important!
The contacts on the connection
cable must face up!
Î
Figure 59: Connecting the CANopen detached Network Interface (AIFX-CO) to the Basic
Card 104C-FB-R\F (Example)
Connect AIFX-DIAG
Only for the basic cards for CIFX 104C-RE\F and CIFX 104C-RE-R\F or the
basic cards CIFX 104C-FB\F and CIFX 104C-FB-R\F:
9. If so, connect the diagnostic detached network interface (AIFX-DIAG):
¾
Connect the
cable connector DIAG X1
on the diagnostic detached
network interface (AIFX-DIAG) with the cable.
¾
Connect the
cable connector DIAG X3
(or X303) on the PC card cifX
with the cable.
¾
Install the detached network interface AIFX-DIAG at the front plate of
the PC cabinet.
Î
Important!
The contacts on the connection
cable must face up!
Î
Figure 60: Connecting the Diagnostic detached Network Interface (AIFX-DIAG) to the Basic
Card CIFX 104C-FB-R\F (Example)
After this:
10. Close cabinet.
¾
Close the cabinet of the PC or connecting device.
11. Plug the connecting cable to the Master or Slave.
¾
For the PC cards CIFX 104C-RE\F or CIFX 104C-RE-R\F note:
Note:
The RJ45 socket is only for use in LAN, not for telecommunication
circuits. For further information refer to section
on
page 151.
