3) Click anywhere on the page to confirm the settings. The configured time will be displayed in
white.
7. Set shortcut key from the drop-down list for the attendance status.
8. Click Save.
The attendance status will be valid within the configured time duration.
Result
Enter the device initial page, the current attendance mode will be displayed on the page. When
you authenticate on the initial page, the authentication will be marked as the configured
attendance status according to the configured time.
Example
If set the Up key as check in and the Down key as check out, and set the check in's schedule as
Monday 08:00, and check out's schedule as Monday 17:00, the valid person's authentication
before 17:00 on Monday will be marked as check in. And the valid person's authentication after
17:00 on Monday will be marked as check out.
Set Manual and Auto Attendance
Set the attendance mode as manual and auto and the device system will auto change the
attendance status according to the configured parameters. At the same time you can manually
change the attendance status before the authentication.
Before You Start
Add at least one person, and set the person's authentication mode. For details, see Person
Management .
Steps
1. Click Access Control → Advanced Function → More Parameters to enter the More Parameters
page.
2. Select a device from the left panel.
3. Click Attendance Status.
4. Set the attendance mode as Manual and Auto.
5. Make sure Attendance Status Required is enabled.
Note
By default, Attendance Status Required is enabled.
6. Set status lasts time.
7. Set available time for the target attendance status.
1) Move the cursor on the target time and the enable checkbox will display.
2) Check the checkbox and set the available time.
3) Click anywhere on the page to confirm the settings. The configured time will be displayed in
white.
8. Set shortcut key from the drop-down list for the attendance status.
DS-K1A802A Series Fingerprint Time Attendance Terminal User Manual
74
