Note
The attendance status will be valid within the configured schedule. For example, if set the Up
key as check in and the Down key as check out, and set the check in's schedule as Monday
08:00, and check out's schedule as Monday 17:00, the valid person's authentication before
17:00 on Monday will be marked as check in. And the valid person's authentication after 17:00
on Monday will be marked as check out.
5. Press ESC and save the settings.
Result
Enter the initial page, the current attendance mode will be displayed on the page. When you
authenticate on the initial page, the authentication will be marked as the configured attendance
status according to the configured schedule.
5.6.2 Set Manual Attendance
Set the attendance mode as manual, and you can select a status manually when you take
attendance.
Before You Start
Add at least one person, and set the person's authentication mode. For details, see Person
Management .
Steps
1. Move the cursor and select System → Att. Status to enter the Attendance Status page.
2. Move the cursor and select Attendance Mode and set the attendance mode as Manual.
Figure 5-6 Manual Mode
DS-K1A802A Series Fingerprint Time Attendance Terminal User Manual
23
