5.4.3 Set EHome Parameters
Set EHome parameters and the device can upload data via EHome protocol.
Before You Start
Make sure your device has connect to a network.
Steps
1. Move the cursor and select Comm. → EHome .
Figure 5-3 EHome Settings
2. Enable the EHome function and set the EHome server parameters.
Center Group 1
Enable center group 1 and the data will be uploaded to the center group.
EHome
Enable EHome function and the data will be uploaded via EHome protocol.
Address Type
Select an address type according to your actual needs.
IP Address
Set the EHome server's IP address.
DS-K1A802A Series Fingerprint Time Attendance Terminal User Manual
17
