HIKVISION AX DS-PWA32-H, Manual, Page: 83 / 121

Enable the partition to automatically arm itself in a specific time point.
Auto Arm Time
Set the schedule for the partition to automatically arm itself.
Late to Disarm
Enable the device to push a notification to the phone or tablet to remind the user to disarm the
partition when the partition is still armed after a specific time point.
Note
You should enable the Panel Management Notification function on the Web Client of
Communication Parameters → Event Communication before enabling the Late to Disarm
function.
Late to Disarm Time
Set the time point mentioned in Late to Disarm.
Weekend Exception
If enabled, Auto Arm, Auto Disarm, and Late to Disarm are disabled on the weekend.
Excepted Holiday
Enable the function and the zone will not be armed/disarmed in the holiday. You should set the
holiday schedule after enabling.
Note
Up to 6 holiday groups can be set.
4.4.13 Check System Status (Zone Status/Communication Status)
You can view the zone status and the communication status via the mobile client.
View Zone Status
In the Partition page, tap Zone to enter the Zone tab. You can view the each zone's status in the
list.
Communication Mode
In the Partition page, tap → Device Information to enter the page. You can view the device
communication status, including the battery, Ethernet network, Wi-Fi, mobile network, data usage
and so on.
Enable Arming Process
In the Partition page, tap to enter the page. Slide to enable Enable Arming Process. After
enabled, the device will auto detect its faults during the arming process. You can determine
whether to continue arming or not if faults are detected.
AX Security Control Panel
74