Note
The device in 868 MHZ may not support adding with serial No..
4) Click Add.
3. Click and the Output Settings window will pop up.
Figure 4-14 Output Settings
4. Edit the relay name and select a link event.
Note
You should set different parameters according to different linked events.
5. Enable Enable Continuous Output or set the output delay time.
Note
If the relay has linked to the wireless output module, the wireless output module information
will be displayed in the Enroll Wireless Output Module area.
6. Check Event Sub-Type (Only for Alarm event).
7. Check partitions linked to the relay. (Zone and Manual event do not have this parameter.)
8. Click OK.
Note
After the relay is configured, you can click Status → Relay to view the output status.
AX Security Control Panel
34
Summary of Contents for AX DS-PWA32-H
Page 1: ...AX Security Control Panel...
Page 121: ...UD17056B...