HIKVISION AX DS-PWA32-H, Manual, Page: 42 / 121

Note
868 Devices do not support inputting serial No.
7. Set the Disconnection Time, and the system determines connection fault if the disconnected
duration of the device is longer than the configured value.
8. Click OK.
Note
After setting the zone, you can enter Status → Zone to view the zone status.
Note
Under the System Options of the Engineer Axiom Web platform there is an option called Early
Alarm, this must be disabled for Sweden.
Output
If you want to the link the device with a relay output to output the alarm, set the output
parameters.
Steps
1. Click Device Management → Relay to enter the Output page.
2. Add a wireless output module.
1) Click Wireless Output Module.
Figure 4-13 Wireless Output Module Settings
2) Select a wireless output module number from the drop-down list.
3) Input the serial No. of the wireless output module.
AX Security Control Panel
33