3. Customize a name for the card in the pop-up window.
4. Select the card type and card linked partition.
5. Select the permission for the card.
Note
You should allocate at least a permission for the card.
6. Click OK and the tag information will be displayed in the list.
Note
The card supports at least 20-thousand serial numbers.
7. Optional: Click and you can change the card name.
8. Optional: Delete a single card or check multiple cards and click Delete to delete cards in batch.
4.3.6 Maintenance
Test
The security control panel supports walk test function.
Steps
1. Enter Maintenance → Test → to enable the function.
Note
Only when all the detectors are without fault, you can enter the mode TEST mode.
2. Check the Test check box to start walk test.
3. Click Save to complete the settings.
4. Trigger the detector in each zone.
5. Check the test result.
AX Security Control Panel
50
Summary of Contents for AX DS-PWA32-H
Page 1: ...AX Security Control Panel...
Page 121: ...UD17056B...