manualshive.com logo in svg

HIKVISION AX DS-PWA32-H, Manual, Page: 19 / 121

Share
Download
HIKVISION AX DS-PWA32-H Manual Download Page 19

Connect Locally

Note

Add the card or keyfob via the web client before adding peripheral device for clearing tampering

alarm.

The distance between the control panel and wireless device should be less than 50 cm.

While the control panel is not in the registration mode, press the function button on the side of the

control panel once and trigger a peripheral device.

Connect via Client Software

Add a control panel to the client software.

In the client software, click Device Management →   → Wireless Device . Select a zone/relay/

siren and enter the Settings page. Input the device serial No. for connection.

Note

For details, refer to the chapter of Configuration-Configure via Web Client-Alarm Settings.

Connect via Web Client

In the web client, click Wireless Device . Select a zone/relay/siren and enter the Settings page.

Input the device serial No. for connection.

Note

For details, refer to the chapter of Configuration-Configure via Web Client-Alarm Settings.

Connect via Mobile Client

Add a control panel to the mobile client.

On the control panel settings page, Click +, scan the QR code on the wireless device or enter the

serial No. of the device.

Note

For details, refer to the chapter ofConfiguration-Configuration via Mobile Client-Add Peripheral to

the Control Panel.

AX Security Control Panel

10

Summary of Contents for AX DS-PWA32-H


























































































































Reviews:

No comments