manualshive.com logo in svg

HIKVISION AX DS-PWA32-H, Manual, Page: 61 / 121

Share
Download
HIKVISION AX DS-PWA32-H Manual Download Page 61

4.3.7 System Settings

Authority Management

Set the authority options.
Click System → System Options to enter the System Option Management page.
Wireless Device Poll Check

If the option is enabled, the system will detect all radio peripherals heartbeat. If no peripherals

heartbeat is detected, the system will upload an event.

Note

For EN, do not switch to OFF.

Control Panel Arming with Fault

If the option is enabled and there are active faults in a zone, the zone will be bypassed

automatically when arming.

Note

You should disable the arming function in the Advanced Settings page. Or the control panel

arming with fault function cannot be valid.

Control Panel Status Notification

If the option is enabled, the device will upload report automatically when the control panel

status is changed.

Disable Function Key

If the option is enabled, all function keys will be disabled.

Voice Prompt

If the option is enabled, the control panel will enable the text voice prompt.

Voice Prompt of Disarming and Alarm Clearing

If the option is enabled, the control panel will broadcast all system faults before disarming and

alarm clearing. Before enable this function, you need to enable Voice Prompt.

System Volume

The available system volume range is from 0 to 10.

Authority Advanced Settings

Set advanced authority parameters.
Click System → System Options → Advanced Settings to enter the Advanced Settings page.

AX Security Control Panel

52

Summary of Contents for AX DS-PWA32-H


























































































































Reviews:

No comments