manualshive.com logo in svg

HIKVISION AX DS-PWA32-H, Manual, Page: 10 / 121

Share
Download
HIKVISION AX DS-PWA32-H Manual Download Page 10

Chapter 1 Introduction

1.1 System Description

AX wireless security control panel, containing 32 wireless zones, supports Wi-Fi, TCP/IP, and

GPRS/3G/4G communication methods. It also supports ISAPI, Hik-Connect, and DC-09, which is

applicable to the scenarios of market, store, house, factory, warehouse, office, etc.
• TCP/IP, Wi-Fi, and GPRS/3G/4G network

• Connects up to 32 wireless zones, 4 wireless outputs, 8 wireless keyfobs, 32 relays and 4 sirens

• Supports up to 13 network users, including 1 installer, 1 administrator, 1 manufacturer, and 10

normal users

Note

The default password of the installer is installer12345, and the default password of the

manufacturer is hik12345. These codes will have to be changed when first connected.

• Supports doorbell function: The detector rings like a doorbell when it is triggered in disarming

status

• Voice prompt

• Wi-Fi settings in AP mode

• Configuration via Web client or mobile client

• Pushes alarm notification via messages or phone calls

Note

Only device containing GPRS/3G/4G communication method supports this function

• Views live videos and sends emails of alarm linked videos via mobile client

• Uploads reports to alarm center

• Long distance two-way communication with AES-128 encryption

• Supports LED indicator to indicates system status

• 4520 mAh lithium backup battery, supports up to 12 h power supply

• SIA-Contact ID protocol compatible

Note

To compliant the EN requirement, the system will only record the same log 3 times continuously.

• The device will be locked 90 s after 3 failed credential attempts in a minute

AX Security Control Panel

1

Summary of Contents for AX DS-PWA32-H


























































































































Reviews:

No comments