manualshive.com logo in svg

HIKVISION AX DS-PWA32-H, Manual, Page: 109 / 121

Share
Download
HIKVISION AX DS-PWA32-H Manual Download Page 109

Input Types

Operations

Gas Zone

The zone activates all the time with sound/siren output when

alarm occurs.
Audible Response: Trigger the system sound and siren.
Voice Prompt: Zone X gas alarm.

Medical Zone

The zone activates all the time with beep confirmation when

alarm occurs.
Audible Response: Trigger the system sound and siren.
Voice Prompt: Zone X medical alarm.

Timeout Zone

The zone activates all the time. The zone type is used to monitor

and report the "ACTIVE" status of a zone, but it will only report

and alarm this status after the programmed time has expired (1

to 599) seconds.

Disabled Zone

Alarms will not be activated when the zone is triggered or

tampered.
Audible Response: No system sound (voice prompt or siren).

Virtual Zone (Keypad/Keyfob)

The system will immediately alarm when it detects triggering

event after system armed.
Audible Response: Trigger the system sound and siren.
Voice Prompt: Buzzer beeps.

Tamper Alarm

The system will immediately alarm when it detects triggering

event after system armed.
Audible Response: Trigger the system sound and siren.
Voice Prompt: Zone X tampered.

Link

Trigger the linked device when event occurs.
e.g. The output expander linked relays will be enabled when the

control panel is armed.

Arm

When armed: Voice prompt for fault. You can handle the fault

according to the voice prompt.
• System sound for arming with card or keyfob.

• Voice prompt for fault. You can handle the fault according to

the voice prompt.

• Fault event displays on client. You can handle the fault via

client software or mobile client.

Voice Prompt: Armed/Arming failed.

AX Security Control Panel

100

Summary of Contents for AX DS-PWA32-H


























































































































Reviews:

No comments