6. Set the Disconnection Time, and the system determines connection fault if the disconnected
duration of the device is longer than the configured value.
7. Optional: Enable Link to Wireless Card Reader and set the serial No.
Note
The card reader in 868 MHZ may not support this function.
8. Click OK.
Note
• All zones are added to the partition 1 by default
• After the keypad is configured, you can click Status → Keypad to view the keypad status.
4.3.3 Partition Settings
Basic Settings
You can link zones to the selected partition.
Steps
1. Click Partition Management → Basic Settings to enter the page.
Figure 4-19 Partition Basic Information Management Page
2. Select a partition.
3. Check Enable.
4. Check the check box in front of the zone to select zones for the partition.
5. Click Save to complete the settings.
AX Security Control Panel
38
Summary of Contents for AX DS-PWA32-H
Page 1: ...AX Security Control Panel...
Page 121: ...UD17056B...