HIKVISION AX DS-PWA32-H, Manual, Page: 45 / 121

Note
The available siren volume range is from 0 to 3 (function varies according to the model of
device) .
4. Check linked partitions.
5. Optional: Enable Enroll Wireless Siren and set the siren serial No.
Note
The siren in 868 MHZ may not support this function.
6. Set the Disconnection Time, and the system determines connection fault if the disconnected
duration of the device is longer than the configured value.
7. Click OK.
Note
After the siren is configured, you can click Status → Siren to view the siren status.
Keypad
You can set the parameters of the keypad that is enrolled to the control panel.
Steps
1. Click Device Management → Keypad to enter the page.
2. Click to enter the Keypad Settings page.
Figure 4-17 Keypad Settings Page
3. Set the keypad name.
AX Security Control Panel
36