manualshive.com logo in svg

HIKVISION AX DS-PWA32-H, Manual, Page: 32 / 121

Share
Download
HIKVISION AX DS-PWA32-H Manual Download Page 32

Note

Only if the alarm receiver center 1 is enabled, you can set the alarm receiver center 2 as the

backup channel and edit the channel parameters.

3. Select the Protocol Type as ADM-CID, EHome, SIA-DCS, *SIA-DCS, or *ADM-CID to set

uploading mode.

Note

Standard DC-09 Protocol

ADM-CID: The data presenting method of DC-09 is CID, which is not encrypted and only for

uploading alarm report.

*ADC-CID: The data presenting method of DC-09 is CID, which is encrypted and only for

uploading alarm report.

SIA-DCS: The data presenting method of DC-09 is DCS (also called SIA protocol), which is not

encrypted and only for uploading alarm report.

*SIA-DCS: The data presenting method of DC-09 is DCS (also called SIA protocol), which is

encrypted and only for uploading alarm report.

-

ADM-CID or SIA-DCS
You should select the Alarm Receiver Type as IP or Domain name, and enter the IP/domain

name, port number, account code, timeout, re-upload times and heartbeat interval.

Figure 4-6 SIA-DCS

AX Security Control Panel

23

Summary of Contents for AX DS-PWA32-H


























































































































Reviews:

No comments