HIKVISION AX DS-PWA32-H, Manual, Page: 77 / 121

System Maintenance
On the device list page, tap the security control panel and then log in to the device (if required) to
enter the control panel page.
Tap → System Maintenance to set parameters.
Reboot Device
The device will restore all parameters to the default settings.
Partly Restore
The device will restore to its default settings except for admin user information, wired network
parameters, Wi-Fi network, detector information, and wireless device parameters.
Public Partition Configuration
On the device list page, tap the security control panel and then log in to the device (if required) to
enter the control panel page.
Tap → Partition Management → Public Partition Configuration to set parameters.
Figure 4-40 Public Partition Configuration
After slide Enable, the partition 1 will be regarded as the public partition.
You can select linked partition as well.
4.4.9 Arm/Disarm the Zone
Arm or disarm the zone manually as you desired.
Note
Axiom security control panel supports 4 partitions.
On the device list page, tap the security control panel and then log in to the device (if required) to
enter the Partition page. You can swipe to the left or right to switch partitions.
AX Security Control Panel
68