How To: Register an OmniLogic (cont.)
21
IF registering the OmniLogic system is not successful, please go to:
Section 1, pg.26
to
troubleshoot a Wired Network connection OR
Section 2, pg. 35
for
Wi-Fi.
When successful, a confirmation screen will
appear. IF unsuccessful, go to
Section 1
if
troubleshooting a wired network, or
Section 2
if troubleshooting for Wi-Fi.
Once a unit is registered, either the dashboard
will appear (bottom image of step 5) OR a
table will appear (only applicable if multiple
MSPs are registered to a single account).
Step 5
Step 6
NOTE: If the web server is unable to locate the OmniLogic system, the
following message will likely appear: “Msp System ID you have input was not
found, please input a valid MSP ID”. IF message appears, verify that the
OmniLogic is powered up, the MSP is configured, and connected the home
network.