16
Plug the longer cable into “PoE” on the injector
into the “LAN (PoE)” of the HLWLAN.
Power down the OmniLogic at the breaker and
remove the dead front.
Plug the injector’s power cable, into the
“HLWLAN POWER” found on the OmniLogic’s
MPP (main board).
Restore power to the OmniLogic. Verify the
MSP’s Ethernet LEDs are illuminated as well as
the “PWR” and “LAN” from the HLWLAN.
Step 4
Step 5
Step 6
Step 7
PoE (Power over Ethernet): the cable plugged into the injector’s “PoE” port should
NEVER terminate at the MSP. Power from the injector goes to the HLWLAN ONLY.
How To: Connect Via Wi-Fi (cont.)