41
2. Wi-Fi Connection: “MSP Not Found” (cont.)
Unplug MSP and check between the 24VDC and GND
solder points for 24VDC. IF voltage is correct, replace
the
HLWLAN
. IF no/low voltage, proceed to
Section 3
(pg. 48)
to diagnose system power.
Verify the network name & password are both correct.
NOTE: passwords ARE case sensitive, should not include
the ‘&’ symbol, AND no spaces. IF correct go to step 2I,
otherwise correct through the network router.
Verify 24VDC on MPP
Network name & password
Step 2G
Step 2H
Unless changed by the homeowner or network installer, the SSID (network name) and
the default password are often published on the router.
