17
On the right of the dashboard locate and tap
the “config” icon.
Press the “wifi bridge” option on the right side
of the screen.
Select the desired network name (SSID) to
attempt connection.
*
Enter the network password, followed by the
check mark to complete.
Step 9
Step 10
Step 11
For best results, make sure the MSP firmware is updated to the latest revision:
www.hayward.com
Support Center> Automation > OmniLogic > Firmware Updates
Step 8
*NOTE: The network password IS CASE SENSITIVE. To confirm connection, go
to Config>Network and verify IP addresses appear under the dynamic tab.
How To: Connect Via Wi-Fi (cont.)
