39
2. Wi-Fi Connection: “MSP Not Found” (cont.)
NOTE: DO NOT hold down the reset button (back of the HLWLAN) for more than
10 seconds.
Verify the cable from the MSP is plugged into the LAN
port on the injector. Then verify the cable plugged into
the HLWLAN’s LAN (POE) port plugs into the injectors
POE port. Finally, verify the injectors power cable is
plugged firmly into the OmniLogic MPP. IF correct, go
to step 2D. IF incorrect, fix & repeat steps on
pg. 15-18
).
On the back of the HLWLAN, verify both the Power LED
& at least one of the LAN LEDs is ON or Flashing. This
will indicate whether or not power has been supplied
to the HLWLAN and if communication has been
established with the local area network. IF LEDs are not
ON, go to 2E. IF correct, jump to step 2H.
Verify HLWLAN connections
On HLWLAN, inspect LEDs
Step 2C
Step 2D