43
2. Wi-Fi Connection: “MSP Not Found” (cont.)
Verify the router is issuing IP addresses. To get out to
the internet, if owner simply connects to the router,
then it is DHCP. IF DHCP, go to step 2L. IF static, IP
credentials must be provided to continue, contact the
network administrator for this information.
On the MSP, power cycle the MSP (
steps on pg. 22
).
When the OmniLogic boots back up, wait 3 minutes &
rescan the network, entering the password. After 5
minutes, IF IP addresses appear go to step 2M. IF no IP
addresses, go to 2N.
Verify the router is set to DHCP
Power cycle MSP and rescan
Step 2K
Step 2L
Most networks run Dynamic (DHCP); this means the router issues IP addresses to
connected devices. Static networks, although rare in residential applications, require
programmed IP credentials in order to connect to the router.
Router
Mobile
Device
