28
If the OmniLogic system has not been configured, web registration will not be
successful. If not configured, load a backed-up file or complete the configuration
process before continuing.
When configured, system dashboard will appear. When
not configured or it has been removed, the
configuration icon will default in the center of the
screen (as shown above). IF configured, go to step 1B. IF
not, complete the configuration process & retest.
Locate the ‘config’ icon & go to system info. Verify the
MSP rev. matches the latest found at
Support Center> Automation >
OmniLogic > Firmware Updates (under MSP). IF not,
follow steps on
pg. 10-12
. IF correct, go to step 1C.
Verify MSP is Configured
Step 1A
Step 1B
Verify the Firmware is up-to-date
1. Wired Ethernet: “MSP Not Found”