Chapter 7 Device Configuring Using EMS
Physical Input Ports and Slots
© 2012 Harmonic Inc.
85
ProView 7000 v.2.6, Rev. E
7.1.4
CAM Slots
The ProView 7000™ has two PCMCIA slots and the ProView 7100™ has four PCMCIA slots on
the front panel that can each accommodate a DVB-CI module with a smart card to
descramble incoming video, see
on page 32 for the location.
7.1.4.1
Inserting a CAM
1. Insert the smart card into a DVB-CI module with the contacts facing up and towards the
front end.
2. Insert the DVB-CI module into one of the two PCMCIA slots with the
up
arrow pointing
upwards and in the direction of insertion.
CAUTION:
Do not remove or insert the DVB-CI module or the smart card while the ProView 7000™ is
powering up or initializing.
Figure 7–6: ProView 7000™ with the DVB-CI module and Smart Card
When installed, the card is detected automatically by the ProView 7000™ and enabled if the
following conditions are met:
■
The installed card must be EN50221 compatible
■
Services have been selected
■
A valid card license
