Chapter 7 Device Configuring Using EMS
Device Properties
© 2012 Harmonic Inc.
153
ProView 7000 v.2.6, Rev. E
7.11 Device
Properties
Use the Device properties to monitor and set ProView 7000™ system level parameters.
To display the Device properties:
1. Select a device icon in the Devices box.
2. Click
Properties
on the EMS toolbar.
The Device Properties dialog displays with multiple tabs, each listing a specific group of
device parameters.
Related topics:
■
■
■
Device Communication Properties
■
Device Users’ Access Properties
■
Device Software Upgrade Properties
■
■
Device Date and Time Properties
■
7.11.1
Network Properties
The Network properties tab provides the EMS user the ability to manage the following
parameters related to the ProView 7000™ unit:
■
Set the IP address of the port.
■
Set the Mask address of the port.
■
Set the Gateway address of the port.
■
View the unit MAC Address.
■
View Auto negotiation status of the port.
■
View the traffic Speed of the port (in Mbps).
■
View the Duplex Mode.
■
Manage the Routing Tables – GbE In mode only.
