Harmonic ProView 7000 User Manual Download Page 170

Page: 170 / 218

Chapter 8 Monitoring using EMS

Refreshing the EMS Screen

170

ProView 7000 v.2.6, Rev. E

8.4

Refreshing the EMS Screen

The EMS supports a user-driven screen refresh function. This function can refresh the
following:

■

Element – Updates a branch or specific element in the stream, either at the multiplexed
input or the multiplexed output.

■

Device – Updates the currently managed ProView 7000™ device.

To refresh an element or device:

1. Select an element or device.

2. Select

File > Refresh > [device|element]

—or—

click

Refresh

on the EMS Toolbar.

You can also perform a refresh by right-clicking the element icon and selecting the Refresh
item in the displayed element drop-down menu.

Summary of Contents for ProView 7000



























































































































































































































Search results

Summary of Contents for ProView 7000

Reviews:

Related manuals for ProView 7000

Brands by name

Popular brands

Harmonic ProView 7000, User Manual

Search results

Summary of Contents for ProView 7000

Reviews:

Related manuals for ProView 7000

Brands by name

Popular brands