Chapter 2 Quick Start
Switching On
© 2012 Harmonic Inc.
20
ProView 7000 v.2.6, Rev. E
2.1.3
Cable Connections
Connect the remaining cables:
■
DVB-S/S2
■
ASI
■
LAN
■
Video output
■
Video monitor
2.2 Switching
On
Switch the unit on with the rear power switch.
Once the boot process is completed (after 2-3 minutes) the
Status OK
message displays on
the front panel LCD.
2.3
Configuring the IP Parameters
To configure the IP parameters of a ProView 7000™:
1. Press
<ENTER>
on the keypad.
The root menu displays.
2. Navigate
Unit > Management Port > IP Configuration
.
3. Set the IP Address, Subnet Mask and Default Gateway for the port.
4. After any change in the IP configuration, the
Apply port changes
item is added to the IP
Configuration sub-menu to allow confirmation of the port setup.
5. Select
Apply port changes
.
6. Select
Apply Changes
.
Status OK
No Service Selected
No Service Selected
IP Configuration
1 IP Address
127.000.000.010
2 Subnet Mask
255.255.255.000
3 Default Gateway
000.000.000.000
