Chapter 4 Device Configuring Using the Front Panel
CA Definitions
© 2012 Harmonic Inc.
53
ProView 7000 v.2.6, Rev. E
4.5 CA
Definitions
Use the CA Definitions menu to configure BISS and associate multiplexes to CAMs and select
individual programs.
To access the CA Definitions menu:
❖
Navigate
Root > CA Definitions
.
The CA Definitions menu comprises configuration sub menus.
4.5.1
BISS
Use the BISS menu to disable BISS descrambling, to define BISS keys or to clear BISS keys.
Sub menus:
■
Activation
■
Key Configuration
4.5.2
CAM 1/2 Sub Menu
The CAM slot sub-menus each comprise:
■
CAM Association
– Use to associate the CAM slot with a multiplex in.
■
Max CAM Bitrate – 72 or 96 Mbps depending on hardware configuration. The default is
72
.
■
CAM De-Jittering – Enable or disable.
■
Automatic Recovery Policy
– Use to configure the ProView 7000™ to reset the CAM when
one of the following alarms is raised:
❑
CAM Descrambling Failure
❑
CAM Processing Failure
❑
Packet Loss after Descrambling
■
CAM MMI
– Use to access the MMI (Man Machine Interface).
4.5.3
CAM Association
To associate a CAM with a multiplex:
1. Navigate
Root > CA Definitions > CAM (1–4)
.
2. Select
CAM Association
.
3. Select a multiplex, TS1, TS2, TS3 or TS4.
4.5.4
Selecting All Elementary Streams
To select all elementary streams for configuring:
1. Navigate
Root > CA Definitions > CAM (1–4) > Descrambling Mode
.
2. Select
Full
.
