Harmonic ProView 7000, User Manual

Page: 139 / 218

Chapter 7 Device Configuring Using EMS CAM Slot Management
© 2012 Harmonic Inc. 139 ProView 7000 v.2.6, Rev. E
3. Click
OK
.
Figure 7–31: CAM Slot properties
4. To configure all ESs and all ECMs, select
Full descrambling
under
Descrambling Mode
.
In Selective ES Descrambling mode only ESs that are scrambled with a CAS ID supported
by the CAM, are descrambled.
Related Topics:
■
Descrambling a Cross Connected Program
■
Descrambling a Decoded Program
7.7.1 Descrambling a Cross Connected Program
To allocate a CAM slot to a scrambled cross-connected program:
1. Cross connect an input program to the output multiplex port (see 7.6.1.2 Program Cross
Connection ).
Check the

Descrambling with checkbox in the Dynamic Program Connection
Configuration dialog and select the CAM slot for the cross-connected program.
2. Click
Create
to confirm the program cross-connection.