Harmonic ProView 7000 User Manual Download Page 169

Page: 169 / 218

Chapter 8 Monitoring using EMS

Alarm History

169

ProView 7000 v.2.6, Rev. E

8.2.1

Alarm Properties

The Alarm Properties displays detailed information on a specific alarm message.

To display the Alarm Properties dialog:

1. Right-click an alarm entry in the Alarms box.

2. Select

Properties

in the drop down menu.

See

Appendix E, ProView 7000™ Alarm List

for the alarm list with corrective actions.

8.3 Alarm

History

Use the Alarms History tab to view a record of alarms triggered. You can export the alarm
history in CSV format.

The alarm severity color codes are the same as those in the Alarm tab.

To display the alarm history for a device:

1. Select the

Alarms History

tab.

2. Select the device in the

Filter

drop-down menu.

The alarm history displays for the selected device.

Summary of Contents for ProView 7000



























































































































































































































Search results

Summary of Contents for ProView 7000

Reviews:

Related manuals for ProView 7000

Brands by name

Popular brands

Harmonic ProView 7000, User Manual

Search results

Summary of Contents for ProView 7000

Reviews:

Related manuals for ProView 7000

Brands by name

Popular brands