Chapter 2 Quick Start
Configuring and Monitoring
© 2012 Harmonic Inc.
26
ProView 7000 v.2.6, Rev. E
2.4.2.2
Launching EMS
Prerequisites:
The device IP address must be configured using the ProView 7000™ front panel, see
2.3 Configuring the IP Parameters
To launch the ProView 7000™ EMS:
❖
Double-click the Harmonic ProView 7000™ EMS launch icon
to launch EMS.
The EMS GUI displays.
2.4.2.3
Adding a Device
The IP Address is the same one you configured in
2.3 Configuring the IP Parameters
page 20. For details on usernames and passwords see
7.10.5 Log-In / Log-Out Control of the
on page 147 and
7.11.4 Device Users’ Access Properties
To add a device:
1. Click
Add Device
on the EMS toolbar
—or—
select
Administration > Add ProView 7000
.
Figure 2–1: Add Device dialog
The EMS displays the Add ProView 7000™ Device dialog.
2. Enter a name for the new ProView 7000™ device.
3. Enter the IP Address of the new ProView 7000™ device.
4. For automatic connection when launching the EMS, mark the
Connect Device
checkbox.
5. Click
Add
.
The Log In dialog displays.
6. Select a username from the drop down menu,
configure
or
monitor
, the password is the
same as the username by default.
The device connects automatically.
