Chapter 7 Device Configuring Using EMS
Device Properties
© 2012 Harmonic Inc.
155
ProView 7000 v.2.6, Rev. E
To add or edit a routing entry:
1. Click
Edit Entry
.
The Routing Table Entry dialog displays.
2. Select the destination type, network or host.
3. Enter the following:
❑
Destination Address
❑
Mask
❑
Gateway
– Enter the GbE IP address that corresponds to the selected GbE port.
4. Select the
Port
.
5. Click
OK
.
To clear a routing entry:
1. Select a routing entry.
2. Click
Clear Entry
.
3. Confirm.
7.11.2
Hardware Properties
The Hardware properties tab provides the EMS user the ability to monitor the following
parameters related to the ProView 7000™ unit, arranged in the following groups / sub-tabs:
NOTE:
Each Hardware Properties sub-tab also displays the highest active alarm level related to the
ProView 7000™ device.
Device Box
The Device box displays the device model name.
Hardware Inventory Box
The Hardware Inventory Box contains the following tabs:
■
■
■
■
■
